Monitored Temperature Measurement - Welch Allyn 53000 Directions For Use Manual

50 Chapter 3 Patient Monitoring

Monitored Temperature Measurement

c
Note
The procedures for monitored and predictive temperature measurements are the same,
with the following exceptions:
For monitored measurements:
•
•
•
1 4. 6
Caution Do not monitor temperature continuously for more than 5 minutes.
Verify that the temperature measurement type is set to monitored. (The letter
, to the right of the temperature display window and below
M M
illuminated.)
The monitor must be set to take a monitored temperature. (See
Temperature Type and Measurement Units"
The monitor displays the temperature continuously.
The measurement continues until the probe is replaced in the probe holder.
kPa
SYS SpO %
2
DIA
8. 9
20:27:50
on page 27.)
/min
84
3 6 .9
ºC ºC
M
Welch Allyn Vital Signs Monitor 300 Series
ºF ºF or ºC ºC , is
"Changing