Selecting Stream Or Batch Printing - Welch Allyn 53000 Directions For Use Manual

Directions for Use

Selecting Stream or Batch Printing

Default setting: BATCH.
For monitors configured with the optional thermal printer:
1. Press
2. Press
3. Press
4. To set the displayed printing method and return to normal operation, do nothing for 10
seconds or press any key other than
), the monitor returns to normal operation with that function (
For information on using the printer, see
and hold for three seconds.
until the message window reads PRINT: BATCH or PRINT: STREAM.
kPa
SYS SpO %
2
DIA
PRINT: STREAM
or to alternate between PRINT: BATCH and PRINT: STREAM display.
kPa
SYS SpO %
2
DIA
PRINT: BATCH
/min
ºC ºC
M
or . If you press a function button (such as
/min
ºC ºC
M
"Patient Monitoring"
Chapter 2 Setup
) activated.
on page 31.
29