Map Measurement Enable And Disable - Welch Allyn 53000 Directions For Use Manual

Directions for Use

MAP Measurement Enable and Disable

Default setting: MAP ENABLED for neonate; MAP DISABLED for adult and pediatric.
1. Depress
2. Press
window.
3. Press
Note
4. To select the displayed state and return to normal operation, either do nothing for 10
seconds or press any button other than
as
For information about MAP measurements, see
for 3 seconds. SET HOUR XX appears in the message window.
repeatedly until MAP ENABLED or MAP DISABLED appears in the display
mmHg
SYS SpO %
2
DIA
MAP DISABLED
or to enable or disable MAP measurement.
If you change the MAP enabled/disabled setting, refer to
Patient Type Affects MAP Defaults"
), the monitor returns to normal operation with that function (
mmHg
SYS SpO %
2
DIA
MAP ENABLED
/min
ºF ºF
on page 38.
or . If you press a function button (such
/min
ºF ºF
"Patient Monitoring"
Chapter 2 Setup 25
"How Changing the
) activated.
on page 31.