Configuring Operating Parameters; How To Use The Menu System - Welch Allyn 53000 Directions For Use Manual

18 Chapter 2 Setup

Configuring Operating Parameters

You can change several monitor operating parameters. When changed, these settings
become the default power-up settings.

How to Use the Menu System

The monitor menu system contains three sets of menus—settings, configuration, and
service.
Settings Menu
Access the settings menu by pressing the menu button
Then press
128
repeatedly to reach the setting of interest.
54
98
37.0
71
MAP 90mmHg
Power Off - all values saved
except target inflation pressure
No action for 10 seconds
or
Press any button other than
Welch Allyn Vital Signs Monitor 300 Series
while in normal operation.
Settings Menu
Patient Type
Target Cuff Inflation Pressure
Temperature Units
Temperature Type
ºF ºF ºC ºC M M
Pulse Tone Volume