4.10
Reverse override switch
WARNING
Only actuate the reverse override switch in idling position (prior to acceler-
ating).
NOTE
The reverse override switch is installed in the centre console at the gear
lever.
The vehicle has a speed limit for reverse. After pressing the reverse override switch
it is possible to drive at a higher speed in reverse.
Overriding the speed limit for reversing:
1.
Let engine idle.
2.
Switch four-wheel drive on (refer to section 4.4).
3.
Go into reverse.
4.
Press and hold reverse override switch.
5.
Accelerate.
4.11
Accelerator pedal
NOTE
The vehicle is equipped with a rev limiter which delays the ignition when the
maximum engine speed has been reached. When the rev limiter is active,
this can be erroneously interpreted as misfires of the engine.
Increasing engine speed and vehicle speed:
1.
Press accelerator pedal.
Reducing engine speed and vehicle speed:
1.
Release accelerator pedal.
Controls 4
29