Arctic Cat Prowler 700i HDX 2015 User Manual page 48

4 Controls
Fig. 28
Converting cargo box into cargo platform:
1. Unscrew one screw (1) on the left-hand-side and one on the right-hand side.
2. Swivel cargo box upwards.
3. Loosen two screws (6) on the left-hand-side and two on the right-hand side and
pull them out as far as necessary to remove the side panels.
4. Swivel cargo box downwards.
5. Open tailgate.
6. Unscrew two screws (3) on the left-hand-side and two on the right-hand side and
remove two retaining ropes (4). Make a note of the correct alignment of the retain-
ing ropes to the cargo platform and to the tailgate.
7. Remove left-hand (2) and the right-hand side panels upwards.
8. Unhook tailgate (5) from cargo platform and remove upwards.
9. Remove screws (6) and nuts (7), (8).
10. Store screws, nuts and retaining ropes at a save location for assembly.
Converting cargo platform into cargo box:
1. Hook tailgate (5) to cargo platform.
2. Lift cargo platform.
3. Screw one nut (7) on each screw (6).
4. Introduce two screws (6) on the left-hand-side and two on the right-hand side
such that the side panels can be inserted.
5. Plug the supports of the left-hand (2) and right-hand side panels into the retainers
of the cargo platform.
6. Insert one nut (8) on the left-hand-side and one on the right-hand side.
7. Screw in and tighten one screw (1) on the left-hand-side and one on the right-
hand side.
8. Tighten four screws (6) applying a tightening torque of 18 Nm.
48