Charge The Battery - Bartec Lumen X7B7-A23-2 SERIES Quick Start Manual

Quick Start
Guide

8. Charge the Battery

The battery in the new Lumen X7 is not charged yet. Please
charge with the bundled adapter cable before your first use.
The Industry Tablet operates either on external adapter or
internal battery power. To connect the Industry Tablet to the
power supply, the protective I/O cover must be opened.
Do not replace or charge the battery in a potentially
explosive atmosphere.
Only use original accessories from BARTEC.
Our warranty does not cover damage to the Lumen
X7 caused by other batteries and/or chargers.
Additional safety instructions for use in potentially
explosive atmospheres, see user manual.
Note:
The actual life of a battery is influenced by different
factors, e.g. hot, cold, rough operating environment
and falling from a great height. Batteries kept for a
duration of six months or longer should be charged
and discharged again at least every three months.
Please don't remove the battery pack or try to take
the Industry tablet apart while the Lumen X7 is
charging. These actions will result in some damages
and may invalidate your warranty.
Subject to technical changes.
06/2016
7" Industry Tablet
Type B7-A23.-2.../........
- Lumen X7
EN 9/12