Table of Contents
Advertisement
The plugs and sockets can be soiled with upholstered or removed seats. This
can lead to functions being restricted.
Cleaning
›
Clean the connectors with a cloth moistened with spirits.
›
Carefully remove dirt from the sockets with a vacuum cleaner.
›
Clean the contacts in the sockets with a cloth moistened with spirits.
CAUTION
If the seats are folded up or removed, store them carefully in the luggage com-
partment and do not load the sockets punctiform - there is a risk of damage to
the sockets.
Headrests
Introduction
Note
In sports seats, the headrests are integrated into the seat backrests and can-
not be adjusted in height.
Adjust height of front head restraint
›
To adjust the height, hold the locking button
sired direction
» Fig.
89.
CAUTION
If the tablet holder adapter is secured to the guide rods of the headrests
» page
102, do not push the headrests down to the stop – risk of damaging
the headrests.
88
Operation
Fig. 89
Setting the height of the head-
rest
and move the rest in the de-
A
Adjusting the height of the rear headrests
Fig. 90 Setting the height of the rear headrest
›
Hold the rest and move upwards in the direction of arrow
›
To move the restraint down, hold the locking button
arrow
and push the rest in the direction of arrow
2
Removing/inserting the rear headrests
Fig. 91 Removing/inserting the rear headrest
›
To remove, pull the rest out of the seat backrest up to the stop.
›
Hold the locking button
in the direction of arrow
A
ing a flat screwdriver with a max. width of 5 mm to press the locking button
in the opening
in the direction of arrow
B
rection of arrow
» Fig.
91.
3
›
To insert the headrest, push the headrest into the seat backrest in the direc-
tion of arrow
until the locking button clicks into place.
4
» Fig.
90.
1
in the direction of
A
.
3
, at the same time us-
1
and pull out the rest in the di-
2
Advertisement
Table of Contents
