CAUTION
Never exceed the maximum permissible load of the holder - there is a risk of
damage or functional impairment.
Attaching the rear headrests
Fig. 123 Inserting: Adapter/Holder
Fig. 124 Removal: Holder / adapter
Read and observe
on page 102 first.
›
Toinsert, attach the opened adapter to the guide rods of the front headrest
and clip in the direction of arrow
›
Clip in the holder in the direction of arrow
›
To remove, pull on the securing tab
holder out of the adapter in the direction of arrow
›
Press the adapter and remove in the direction of the arrow
guide rods of the headrest.
102
Operation
» Fig. 123
»
.
1
into the adapter.
2
in direction of arrow
and take the
A
3
» Fig.
124.
4
from the
5
WARNING
Be careful with the adapter- otherwise there is a risk of finger injury.
Attach in the opening in the middle backrest
Fig. 125 Inserting holder / Removing holder
Read and observe
on page 102 first.
›
Insert the holder in the opening
›
To remove, pull on the securing tab
remove the holder.
Handling the holder
Fig. 126 Tilting and rotating the holder
in the direction of the arrow
A
1
in the direction of the arrow
B
» Fig.
125.
and
2