Rear seats
Seat backrests
Fig. 79 Folding the seat backrest forwards / inserting the belt into the
opening in the side panel
Before folding the seat backrests forwards, adjust the position of the front
seats in such a way that they are not damaged by the seat backrests. If neces-
sary, remove the rear head restraints
Folding forward
›
Push the release lever
in the direction of arrow
A
backrest in the direction of arrow
Folding backwards
›
Pull the seat belt
for the side panel in the direction of arrow
C
›
Raise the seat backrest against the direction of arrow
handle
audibly locks. Check this by pulling on the seat backrest.
A
›
Make sure that the red pin
is hidden.
B
WARNING
The seat backrests in the occupied rear seats must be properly engaged.
■
When transporting objects in the luggage compartment that has been en-
■
larged by folding the backrest forward, ensure the safety of the passengers
transported on the rear seat.
The seat backrests must be securely latched in position so that no objects
■
from the luggage compartment can slip into the passenger compartment
under sudden braking – risk of injury.
84
Operation
» page
88.
and fold down the seat
1
» Fig.
79.
2
» Fig.
3
until the release
2
CAUTION
When operating the seat backrests, the seat belts must not be pinched - there
is a risk of damage to the seat belts.
VarioFlex rear seats
Adjusting the seats
79.
Fig. 81 Adjusting the angle of the seat backrest
Move in the longitudinal direction
›
Pull lever
in the direction of arrow
A
sition in the direction of arrow
the latch must engage audibly.
Adjusting the angle of the seat backrest
›
Pull on the loop
in the direction of arrow
B
backrest in direction of arrow
into place.
Fig. 80
Adjusting seats in forward/back
direction
and move the seat to the desired po-
1
» Fig.
80. After releasing the control lever
2
» Fig. 81
and press the seat
1
. The locking mechanism must audibly snap
2