Table of Contents
Advertisement
Fasten the flooring
Read and observe
and
The flooring can be fastened with the hook to the strip on the left side of the
luggage compartment.
›
Move the front hook
as far forward as possible and fold it down as far as
A
it will go
» Fig.
134.
›
Fasten the flooring hook
in front of the hook
B
down.
CAUTION
The flooring covering may be only fastened to this strip with the boot open.
Before closing the lid, check that the flooring is not fastened to the strip -
there is a risk of damage to the luggage compartment cover.
Floor covering on both sides
Read and observe
and
A double-sided floor covering can be fitted in the luggage compartment. One
side is made of fabric, the other side is washable (suitable for transporting wet
or dirty items ).
106
Operation
Fig. 134
fixing the floor covering
on page 103 first.
that has been folded
A
on page 103 first.
Luggage compartment cover
Fig. 135 Remove the luggage compartment cover
Fig. 136 Luggage compartment cover stowed behind the rear seats
Read and observe
and
If the retaining straps
» Fig. 135
A
the lid will also raise the luggage compartment cover (hereafter only referred
to as "cover").
The cover may be removed from the vehicle or stored in front of the bracket
» Fig.
136.
D
Removing
›
On both sides of the boot lid, unhook the straps
» Fig.
135.
1
›
Hold the raised cover and press on the two sides on the underside of the
cover in the area of the recess
›
Remove the cover in the direction of the arrow
on page 103 first.
are attached to the boot lid, then opening
in the direction of arrow
A
.
C
.
2
Advertisement
Table of Contents
