Removing bulbs for low and main beam
Fig. 338 Removing bulbs for low and main beam
Read and observe
and
›
Remove the protective caps
A
›
Press the latch
on the holder in the direction of the arrow
A
›
Remove the connector to the bulb in the direction of arrow
›
Remove the connector.
›
Plug the connector into the new bulb so that the fixing lug
points upwards.
›
Insert the connector, with the bulb, into the headlight opposite to the direc-
tion of arrow
until you feel it lock into place.
2
Change the light bulb for the parking light
Fig. 339 Change the light bulb for the parking light
Read and observe
and
›
Remove the protective cap
B
on page 290 first.
and
» Fig. 337
on page 290.
B
1
.
2
on the bulb
B
on page 290 first.
» Fig. 337
on page 290.
›
Press the attachment securing lugs in the direction of arrows
fully pull out the bulb holder with the bulb.
›
Grasp the holder in area
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb in the holder until it stops.
›
Insert the holder with bulb into the headlight again.
›
Fit protective cap
Changing the bulb for the front turn signal light
» Fig.
338.
Fig. 340 Changing the bulb for the front turn signal light
Read and observe
›
Remove the protective cap
›
Remove the holder with the bulb by jiggling it out in the direction of the ar-
row
» Fig.
340.
1
›
Hold the holder with the bulb at the position shown by the arrows.
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb in the holder until it stops.
›
Slide the holder with the bulb with the fixing lug
into the recess on the reflector.
›
Fit protective cap
.
A
» Fig. 337
on page 290.
B
and
on page 290 first.
» Fig. 337
on page 290.
B
B
» Fig. 337
on page 290.
B
Fuses and light bulbs
, and care-
1
.
2
.
2
upwards so that it fits
291