CAUTION
Only switch the function on and off when the vehi-
▶
cle is stationary.
Rear seats
Folding down the seat backs
Before folding down
›
Insert the rear headrests as far as they will go or
remove them.
›
Adjust the position of the front seats in such a way
that they are not damaged by the folded-down
seat backrests.
›
For vehicles with a mesh partition, roll it into the
housing, then unlock the left seat backrest fol-
lowed by the right seat backrest.
›
Pull the outer seat belt to the side trim.
Folding forwards from the passenger compart-
ment
Folding forwards from the luggage compartment
Folding back up
›
Press the release han-
dle and fold the seat
forwards.
›
Pull on the lever.
The seat back is un-
locked and partly fol-
ded forwards.
›
Pull the outer seat belt
to the side trim.
›
Fold the seat backrest
back up.
The release handle must
audibly click into place.
›
Check that the seat
backrest has locked in
place. The pin
must
A
not be visible.
Seats, steering wheel and mirror ›
Headrests
Adjusting the height of the headrests
Front headrests
Rear headrests
Folding side bolsters on the rear headrest
Removing and inserting the rear headrests
Removing
and remove the headrest.
Inserting
›
Insert the headrest into the seat backrest.
Rear seats
35
›
Hold the safety button
and move the headrest
in the desired direc-
tion.
›
Move the headrest in
the desired direction.
When pushing down,
press and hold the
safety button.
The folded down side
bolsters reduce uncon-
trolled sideways head
movement , e.g. when
sleeping.
›
Adjust the headrest to
the initial pulled out
position.
›
Fold down the side bol-
sters on the head rest.
›
Partially fold the re-
spective seat back for-
wards.
›
Move the headrest up
to the stop.
›
Hold safety button
A
and, at the same time,
push safety button
B
into the opening with a
flat-head screwdriver