Radio
service
Introduction to the subject
Depending on the vehicle equipment fitted and the Infotainment type, ana-
logue FM and AM frequency bands can be received as well as digital radio re-
ception DAB.
CAUTION
For vehicles with window antennas do not stick foil or metal coated stickers
■
to the window - Radio signal reception could be affected.
Car parks, tunnels, tall buildings or mountains can interfere with the radio
■
signal even causing it to fail completely.
main menu
›
To display the main menu, press the sensor field/the
›
or tap the sensor field
and then the function surface .
Main menu
» Fig. 174
The selected radio station (description or frequency)
A
Radio text (FM) / Description of the group (DAB)
B
Preset station buttons for favourite channels
C
Choice of radio range (FM / AM / DAB)
D
Choice of storage group for the preferred station
E
Changing the station
List of available stations
Manual / semi-automatic station search
142
Infotainment
Fig. 174
Radio: Main Menu (DAB)
button.
Radio text display (DAB) / image presentation (DAB)
Settings of menu Radio
» page 134
Information symbol in the status line
Symbol
Traffic signal is available
Traffic signal is not available
Signal is not available (DAB)
If the displayed station name continuously changes (dynamic text), then it is
possible to fix the current text by holding your finger on the device screen in
the station name area. By holding your finger in the area of the station name
again, the station name is displayed in its entirety again.
Search stations and select frequency
Find stations
›
Tap on the function surface in the Radio main menu or .
Depending on the setting → Arrow buttons:, an available station from the Sta-
tion list or a station stored to the Preset buttons for the currently selected
radio frequency range is set.
Select frequency
›
To display the value of the currently chosen frequency, tap the function sur-
face in the Radio main menu .
›
To Set the desired frequency value in Infotainment Swing, use the slider or
the function surfaces in the bottom area of the screen, if necessary, turn
the controller (not applicable to Infotainment Columbus)
Scan through the stations one after the other (scan)
The function scans through all the available stations in the current frequency
range in succession, for a few seconds each.
›
To start automatic scanning of the available stations, go to the main Radio
menu and tap on the function surface → Scan.
›
To end autoplay, tap the function surface .
or
» page 140
Meaning