Table of Contents
Advertisement
WARNING
Please take note of the general points relating to the use of assistance
■
systems
» page 209,
in section Introduction.
Having the correct tyre inflation pressure is always the driver's responsi-
■
bility. Tyre pressure should be checked regularly
The system cannot warn in case of very rapid tyre inflation pressure loss,
■
e.g. in case of sudden tyre damage.
Before storing the pressures, the tyres must be inflated to the specified
■
inflation pressure
» page
268. If the wrong pressure valuesare stored, the
system may not issue any warnings, even if the tyre pressure is too low.
CAUTION
To ensure proper system function, the tyre pressure values must be stored ev-
ery 10,000 km or 1x a year.
Storing the tyre pressure values and Infotainment display
Read and observe
and
Procedure for storing the tyre pressure values
›
Inflate all the tyres to the specified pressure.
›
Turn on the ignition and switch on Infotainment.
›
In the infotainment system, in menu
→ Vehicle status.
›
Use the function surfaces to select menu item Tyre Pressure Loss Indi-
cator.
›
Tap the function surface
In addition, follow the instructions that appear on the screen.
246
Driving
» page
268.
Fig. 287
Button for storage/example of
the screen: a change in the front
left tyre pressure is indicated
on page 246 first.
/ tap on function surface Tap
» Fig.
287.
A message on the screen informs about the storage of the tyre pressure val-
ues.
Note
When a warning light in the instrument cluster appears, the affected tyre
can be displayed on the infotainment
» Fig.
287.
Advertisement
Table of Contents
