Table of Contents
Advertisement
Net partition
Fig. 139 Net partition behind the rear seats
Read and observe
and
The net partition can either fitted behind the front seats or behind the rear
seats.
Fitting/removing net partition behind the rear seats
›
To the install the cross rod into the mount
press it forward. Insert the transverse rod into the mount
side of the vehicle in the same way
›
Latch the carabines
at the belt ends into the lashing eyes
B
›
In the case of vehicles with the variable loading floor,lock the carabiners into
the front lashing eyes
» Fig. 128
D
›
Pull the straps at the free ends tightly
Removingis carried out in the reverse order.
Fitting/removing net partition behind the front seats
The process is analogous to that for behind the rear seats.
The lashing eyes for hooking the carabiner are located under the central body
pillars.
108
Operation
on page 103 first.
, first insert it at side and then
A
on the other
A
» Fig.
139.
.
C
on page 104,
» Fig.
139.
D
WARNING
Depending on the equipment fitted, a "safety loop" can be on the net parti-
tion belts. Never try to detach the "loop". In the event of an accident, the
net partition could become detached and thus occupants sustaining inju-
ries.
Note
The opening
in the net partition is for passing the seat belt through.
D
Storage compartments in the luggage compartment
Fig. 140 Storage compartments, removing the cover / inserting the
cover
Read and observe
and
The fixed storage compartment
the luggage compartment and is intended for placing small items up to a total
weight of 1.5 kg.
The storage compartment
is on both sides of the luggage compartment
B
and is designed for storing small objects of up to 2.5 kg. in weight in total.
The cover can be removed in the direction of arrow
rection of arrow
.
2
on page 103 first.
» Fig. 140
can be on the left or right side of
A
and inserted in the di-
1
Advertisement
Table of Contents
