Safety Instructions - HBM C16i series Installation Instructions Manual

10
Contents
1

Safety instructions

2 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Technical data
5 Dimensions and Mounting accessories
Scope of supply:
-- Pendle load cell with connection cable
-- Dowel pin for rotation stop device
-- Plastic bag with grease
-- Mounting instructions
Mounting Accessories (optional):
Mounting Variation 1:
-- C16/ZOU44A thrust pieces (stainless steel) for above and below (1 Set = 2 pcs.),for use with
C16.../≤60t up to a max. load per load cell of 40 tons, incl. mounting set 2-9290.0070 (3 excentric
washers, 90mm flexible tube, tube clip)
Mounting Variation 2:
-- EPO3/50t thrust piece for above, incl. spanner
-- C16/EPU44A thrust piece for below, incl. mounting set 2-9290.0070 (3 excentric washers,
90mm flexible tube, tube clip)
1 Safety instructions
The load cells can be used as machine components. Please note that in these cases, in order to
achieve high sensitivity, the load cells have not been designed with the safety factors normally
applied in machine design.
Where a fracture might involve damage to property and injuries to persons, appropriate security
measures (e.g. antifall guard) must be taken by the user (observe the relevant accident protection
regulations).
Take into account the maximum limit loads given in the Technical data. The technical data for the load
cells applies within the specified load limits only.
The electronic system processing the measurement signal must be designed such that no
consequential damage is caused by the failure of the measurement signal.
Wägezelle
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Load cell
• •
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MA.C16i.0def -- 284.00--1053.4 -- Version a -- 05.04.2001
Capteur de pesage
français (page 18 ... 25) = en préparation
C16i...
Page
10
11
15
17
26