Built-In Analog I/O Specifications (Xa Cpu Units Only) - Omron CP1H-X40D Operation Manual

Specifications
Pulse Outputs (CIO 100.00 to CIO 100.07)
Note
PWM Outputs (CIO 101.00 and CIO 101.01)
2-2-4

Built-in Analog I/O Specifications (XA CPU Units Only)

Analog I/O Terminal Block Arrangement
Note
Item
Max. switching capacity
Min. switching capacity
Max. output frequency
Output waveform
(1) The load for the above values is assumed to be the resistance load, and
does not take into account the impedance for the connecting cable to the
load.
(2) Due to distortions in pulse waveforms resulting from connecting cable im-
pedance, the pulse widths in actual operation may be smaller than the
values shown above.
Item
Max. switching capacity
Max. output frequency
PWM output accuracy
Output waveform
1 2 3 4 5 6
A/D
Pin Function
1 IN1+
2 IN1−
3 IN2+
4 IN2−
5 IN3+
6 IN3−
7 IN4+
8 IN4−
Do not connect the shield.
Specification
30 mA/4.75 to 26.4 VDC
7 mA/4.75 to 26.4 VDC
100 kHz
OFF
90%
10%
ON
4 µs min.
The OFF and ON refer to the output transistor. The output
transistor is ON at level "L".
Specification
30 mA/4.75 to 26.4 VDC
1 kHz
For ON duty +5%, −0%/1 kHz output.
OFF
ON
t
ON
T
The OFF and ON refer to the output transistor. The output
transistor is ON at level "L".
7 8 9 10 11 12 13 14 15 16
D/A
Pin Function
9 OUT V1+
10 OUT I1+
11 OUT 1−
12 OUT V2+
13 OUT I2+
14 OUT 2−
15 IN AG*
16 IN AG*
Section 2-2
2 µs min.
t
ON
× 100%
ON duty =
T
63