Omron CP1H-X40D Operation Manual page 67

Cpu unit sysmac cp series

Hide thumbs Also See for CP1H-X40D:

Table of Contents

Connecting Programming Devices

Connection Setup Using the CX-Programmer

1. Select CP1H as the device type in the Change PLC Dialog Box and con-

firm that USB is displayed in the Network Type Field.

2. Click the OK Button to finish setting the PLC model. Then connect to the

CP1H by executing the CX-Programmer's online connection command.

Chapters

Table of Contents

Cp1h-xa40d Cp1h-y20dt-d Cp1h