Omron CP1H-X40D Operation Manual page 618

Trouble Shooting
Error ERR
code LED
03C0 FLASH FINS/TCP setting error
03C2 --- FINS/TCP packet
discarded
03C3 --- FINS/UDP Packet
discarded
03C8 --- Socket Error
03D0 FLASH System setup sum value
error
0601 LIT Option Board error
0602 LIT Option Board memory error 01: Read
584
Detailed error code
Meaning
1st byte
01 to 02:
Connection
No.
01 to 02:
Connection
No.
00
Arbitrary
Arbitrary
error
02: Write
error
Correction
2nd byte
01: Set the FINS/TCP
Automatically settings correctly.
allocated
FINS node
address
duplication
02:
Destination
IP address
error
03:
Destination
port number
error
03: Resend the command.
Reception
There is too much load
error
(traffic) on the Ethernet
04:
Option Board. Correct the
Transmission
system so that traffic is not
error
concentrated.
01 to FE The automatic generation
Node address (static) method was used
as the IP address conver-
sion method, so remote IP
address information in
internal memory could not
be changed.
Resend the packet or the
destination node is not in
the network.
Reset the value of system
setup area, Restart CPU
Unit.
Restart the CPU Unit. If
the problem persists,
replace the Ethernet
Option Board.
06:Error log Restart the CPU Unit. If
the problem persists,
replace the Ethernet
Option Board.
Section 9-11
EEPROM
---
---
---
---
---
Saved
Saved
Saved
(except
error log)