Connecting An External Decoder Box (1) - Pioneer DVR-520H Operating Instructions Manual

Connecting up

Connecting an external decoder box (1)

If you have an external, dedicated decoder box for your satellite or cable TV system, use the setup described on this
page.
Important
• Do not connect your decoder box directly to this recorder.
• Information from the decoder (for example, relating to pay TV services), is only viewable when this recorder is off
(in standby).
• For timer recording to work properly on this recorder, the VCR/satellite receiver/cable box must also be switched
on during recording.
• It is not possible to watch one TV program and record another using this setup.
1 Connect the cable from the antenna/cable TV
outlet to the antenna input on your VCR/satellite
receiver/cable box.
2 Use a SCART cable (not supplied) to connect your
decoder to your VCR/satellite receiver/cable box.
See the manual for your decoder box for more detailed
instructions.
SCART AV
CONNECTOR
4
TV
ANTENNA
OUT IN
R L
AUDIO
VIDEO
S-VIDEO
AV 1 (RGB) - TV
OUTPUT
SCART AV
CONNECTOR
Decoder
Antenna/cable TV
wall outlet
AC IN
IN OPTICAL
AV 2/AUTO START REC
CONTROL DIGITAL OUT
(INPUT 1/DECODER)
3
2
SCART AV
CONNECTOR
VCR/Satellite receiver
ANTENNA
/Cable box
IN
1
3 Use a SCART cable to connect your VCR/satellite
receiver/cable box to the AV2/AUTO START REC
(INPUT 1/DECODER) AV connector on this recorder.
4 Use a SCART cable to connect the AV1(RGB)-TV
AV connector to your TV.
02
17
En