Maintenance; Maintenance Plan; Maintenance Work - Nilfisk-Advance MC 5M Instructions For Use Manual

MC 5M - MC 6P - MC 7P

7 Maintenance

7.1

Maintenance plan

7.2.1 Cleaning water inlet fi lter
7.2.2
Checking pump oil level
7.2.3 Changing pump oil
First change - and
7.2.4 cleaning of magnet on
drain plug
7.2

Maintenance work

7.2.1 Cleaning water inlet
filter
7.2.2 Checking the pump oil
level
20
First time
after 50
Weekly
operating
hours
A
Every 500
operating As required
hours
A water filter is fitted on the wa-
ter inlet to prevent large parti-
cles of dirt from entering into the
pump.
1. Unscrew the quick-release
connection if mounted.
2. Remove the filter and rinse it.
Replace damaged filter.
1. Check the oil level.
On level ground, the oil
should be above MIN. level
(A), when the oil is cold.
Options / model variants
1)
Original instructions