Related Manuals for Nilfisk-Advance MC 2C-180 PE
Summary of Contents for Nilfisk-Advance MC 2C-180 PE
- Page 1 MC DE, MC PE, MC PE PLUS - Instructions for use 106169306 c (09.2015) EN-DE-FR-NL-ES-DA-NO-SV-FI...
- Page 2 User manual ........................3 - 17 Betriebsanleitung ....................... 18 - 33 Manuel d‘instructions ......................34 - 48 Gebruikershandleiding....................... 49 - 64 Manuale di istruzioni ......................65 - 80 Instruktionsbog ........................81 - 96 Instruksjonsbok........................97 - 111 Instruktionsbok ........................112 - 126 Käyttöohje..........................
-
Page 3: Table Of Contents
MC DE, MC PE, MC PE PLUS Contents Safety Precautions and Warnings ....................4 Description .............................5 2.1 Intended use ..........................5 2.2 Operating elements ........................5 Before starting the pressure washer ...................6 3.1 Setting up the pressure washer (does not apply to MC 2C-180/700 PE / MC 3C-165/810 PE) .........................6 Operation and use .........................6 4.1 Connections..........................6... -
Page 4: Safety Precautions And Warnings
MC DE, MC PE, MC PE PLUS Symbols used to mark instructions This symbol is used Before starting to mark safety up your high- instructions pressure washer that must be for the fi rst time, observed to prevent this instruction damage to the machine and its manual must be read through performance. -
Page 5: Description
MC DE, MC PE, MC PE PLUS 2 Description Intended use This high pressure washer has - agriculture been designed for professional - transport industry use in - construction industry etc. WARNING! Do not use combustion engine powered machines indoors unless adequate ventilation is assessed by national labour authorities. -
Page 6: Before Starting The Pressure Washer
MC DE, MC PE, MC PE PLUS 3 Before starting the pressure washer Setting up the pressure washer (does not apply to MC 2C-180/700 PE / MC 3C-165/810 PE) 1. Before using the pressure washer for the fi rst time, check it carefully to detect any faults or damage. -
Page 7: Connecting The High Pressure Hose And The Water Hose
MC DE, MC PE, MC PE PLUS 4.1.2 Connecting the high pressure hose and the water hose 1. Connect the high pressure hose to the high pressure inlet by means of the quick coupling. Use max. 50 m extension hose. 2. -
Page 8: Switching On The Washer When It Is Connected To Open Tanks (Suction Mode)
MC DE, MC PE, MC PE PLUS 4.2.2 Switching on the 1. Before connecting the suction the by-pass hose and / or washer when it is hose to the washer, fi ll the move the engine throttle to connected to open hose with water. -
Page 9: Using Detergents
MC DE, MC PE, MC PE PLUS Using detergents Detergent can be added by means of the detergent injector. 1. Dilute detergent according to the manufacturer's instructions. 2. Set the pressure to the lowest setting on the lance. CAUTION! Never allow detergent to dry on the surface to be cleaned as this may cause damage. -
Page 10: Disconnecting Supply Lines
MC DE, MC PE, MC PE PLUS Switching off MC DE 1. Stop the washer by moving the throttle lever to STOP position. 2. Switch off the ignition by pushing the ON/OFF button. The light indicators will now turn off. Disconnecting supply 1. -
Page 11: Maintenance
MC DE, MC PE, MC PE PLUS 6 Maintenance Maintenance plan every six weekly months or as required 500 operating hours • 6.2.1 Clean water fi lter • 6.2.2 Clean high pressure nozzle • 6.2.3 Check oil level • 6.2.4 Change oil - Note: First time after 50 hours •... -
Page 12: Checking The Oil Level
MC DE, MC PE, MC PE PLUS 6.2.3 Checking the oil level (does not apply to MC 2C-180/700 PE / MC 3C-165/810 PE) 1. Check whether the oil level is in the middle of the oil inspection glass, oil cup or dip stick. -
Page 13: Check Of V-Belts
MC DE, MC PE, MC PE PLUS 6.2.5 Check of V-belts 1. Remove the spark plug cable. 2. Dismantle the cover of the V-belts. 3. Check the belts for any damage or missing tension. 4. If required, replace the belts. 5. -
Page 14: Troubleshooting
MC DE, MC PE, MC PE PLUS 7 Troubleshooting Cause Remedy Fault Pressure drop > Air in the system • Vent the system by operating the spray gun several times at short intervals. If necessary, dismount the lance (see section 4.2.2). >... -
Page 15: Further Information
MC DE, MC PE, MC PE PLUS Cause Fault Remedy > Low oil level in engine • Fill with oil. The motor stops > Low oil level in pump(does • Fill with oil not apply to MC 2C-180/700 When a detergent injector is >... -
Page 16: Technical Data
MC DE, MC PE, MC PE PLUS Technical data Original Instructions... -
Page 17: Ec Declaration Of Conformity
MC DE, MC PE, MC PE PLUS EC Declaration of Conformity Nilfi sk A/S Kornmarksvej 1 DK-2605 Broendby DENMARK Hereby solely declare, that the product: Product Description Type MC 5M *.* DE, PE, PE PLUS MC 2C */* PE HPW - Professional - Mobile Petrol - diesel driven MC 3C */* PE MC 7P */* PE PLUS... - Page 18 PERU HEAD QUARTER GERMANY TURKEY Nilfi sk S.A.C. Nilfi sk GmbH Nilfi sk A.S. DENMARK Calle Boulevard 162, Of. 703, Lima 33- Guido-Oberdorfer-Straße 2-10 Serifali Mh. Bayraktar Bulv. Sehit Sk. No:7 Nilfi sk A/S Perú 89287 Bellenberg Ümraniye, 34775 Istanbul Kornmarksvej 1 Lima Tel.: +90 216 466 94 94...