Maintenance; Maintenance Plan; Maintenance Work - Nilfisk-Advance MC 8P Instructions For Use Manual

7 Maintenance

7.1

Maintenance plan

7.2.1 Cleaning water inlet filter
7.2.2 Checking pump oil level
7.2.3 Changing pump oil
7.2

Maintenance work

7.2.1 Cleaning water inlet
filter
7.2.2 Checking the pump oil
level
7.2.3 Changing the pump oil
10
After the first 50
Weekly
operating hours



A
Every six months
or 500 operating
required
hours

A water filter is fitted on the wa-
ter inlet to prevent large parti-
cles of dirt from entering into the
pump.
1. Unscrew the quick-release
connection.
2. Remove the filter and rinse it.
Replace damaged filter. Re-
place damaged filter.
1. Check whether the oil level
is between the minimum and
maximum marks. If neces-
sary, add oil (see chapter 9.4
for type of oil).
1. Unscrew the oil drain plug (A)
and drain oil into a suitable
container.
2. Check that the drain plug
gasket is in place and reinstall
drain plug.
3. Fill pump with proper grade
and amount of oil.
O i l g r a d e a n d c a p a c i t y
see chapter '9.4 Technical
Data'.
As
