Assembly - Pro-Form CROSSWALK 590 LT User Manual

ASSEMBLY

To hire an authorized service technician to assemble this product in your home, call 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: After shipping, there may be an oily sub-
stance on the exterior of the treadmill or on the shipping carton. This is normal. If there is an oily substance on the
treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys
adjustable wrench
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is
the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached.
Extra hardware may be included.
M8 Star
Washer (9)–4
Base Foot Spacer
(94)–2
Screw Spacer (98)–4
and your own Phillips screwdriver
, and scissors . To avoid damaging parts, do not use power tools.
#8 x 1/2" Ground
Screw (29)–1
M10 Star
Washer (8)–4
M8 x 25mm
3/8" Jam Nut
(5)–1
M10 Locknut
(36)–2
M4.2 x 19mm
Screw (1)–8
Bolt (4)–4
M10 x 96mm Screw (7)–4
M10 x 50mm Bolt (26)–2
6
3/8" x 4 3/4" Bolt (115)–4
,
M4.2 x 25mm Tek
Screw (2)–4
3/8" x 1 3/4" Bolt (6)–2