With The Help Of A Second Person, Carefully Tip The - Pro-Form CROSSWALK 590 LT User Manual

1. Make sure that the power cord is unplugged.

With the help of a second person, carefully tip the

treadmill onto its left side. Partially fold the Frame
(57) so that the treadmill is more stable; do not
fully fold the Frame yet.
Remove and discard the two indicated screws (A)
and the shipping bracket (B).
Cut the shipping tie securing the Wire Harness
(92) to the Base (99). Next, locate a tie in the
indicated hole in the Base, and use the tie to pull
the Wire Harness out of the hole.
See the inset drawing. Cut off the end of the tie.
2. Attach two Base Feet (93) to the Base (99) in
the locations shown with two M4.2 x 25mm Tek
Screws (2) and two Base Foot Spacers (94).
Attach the other two Base Feet (93) with two
M4.2 x 25mm Tek Screws (2).
1
57
2
99
94
93
2
94
7
B
92
Cut
Tie
93
2
A
99
Hole
92
93
2
93
2