Alpha Technologies IPBELLv2-01 User Manual page 54

SMTP port – adjust in case of none standard SMTP server setting only. SMTP
port is setup usually on value 25, but better is use port 587.
SMTP, there are three systems:
- Port 25 not allow encrypted - it is marked as obsolete, insufficient safety
- Port 465, not a domain hosting - is labeled as not recommended at
- Port 587, has no maladies previous two, is currently the only
recommended variant
SMTP account – when SMTP server requires authorization then must be in this
field mentioned name for registration to server. In opposite case leave
field empty.
SMTP password – password for registration to SMTP server.
Message from– sender e-mail mentioned in sent email.
Default message to – door entry send emails to adress mentioned in phone
book at appropriate subscriber. When you leave this field empty then
email is sent to default email which you setup in this field. When
receiver is not mentioned in phone book as same as default email field
the email is not sent. This e-mail is designed also for function control –
Send control message – when you want verify correct functionality of
emails sending then this control message is sent to this email.
Send timeout – Setup max time for which door entry try to deliver email to
inaccessible SMTP server
Attach pictures – enable send attachment with one or more Picture taken during
ringing.
Pictures count – setup Pictures number which will be attached to email.
Picture interval – setup time between each pictures
Message subject – setup subject of sending email message
Message body – enable correct contents of sending message. You can insert
to text special alternative symbols for user name, date and time for
door entry identification. Those alternative symbols will be substitute
by actual value before email sending. Via follow table of alternative
symbols:
Send test message – when you want verify correct functionality of email sending
then control message will be sent to default email
54 User manual
IPBELLv2
-
$Device$ = door entry identification
$Date$ = current date
$Time$ = current time
$User$ = name of dialled subscriber
$DialNumber$ = dialled phone number