Summary of Contents for Alpha Technologies IP bell
Page 1
ALPHATECH TECHNOLOGIES s.r.o. www.alphatechtechnologies.cz IP Bell – iBell setup guide IP Bell a SIP based VoIP video doorphone intercom, in this example in P2P mode iBell a video softphone application designed for SIP doorphones of ALPHATECH TECHNOLOGIES...
Page 2
ALPHATECH TECHNOLOGIES s.r.o. www.alphatechtechnologies.cz 1. Setup static IP address, which will be the IP address of iBell video softphone installed on your Windows PC...
Page 3
ALPHATECH TECHNOLOGIES s.r.o. www.alphatechtechnologies.cz 2. Check if your VoIP FW is up-to-date, version 2.51 or higher...
Page 4
ALPHATECH TECHNOLOGIES s.r.o. www.alphatechtechnologies.cz Check your network settings...
Page 5
ALPHATECH TECHNOLOGIES s.r.o. www.alphatechtechnologies.cz 4. Setup memory numbers and then click on save changes...
Page 6
ALPHATECH TECHNOLOGIES s.r.o. www.alphatechtechnologies.cz 5. Setup iBell video softphone as show below and then click on Save and Restart...
Page 7
ALPHATECH TECHNOLOGIES s.r.o. www.alphatechtechnologies.cz 6. Start using IP Bell with iBell video softphone app („Open Call“ starts/accepts the call, „Open Door“ starts/accepts the call and dials the door lock access code, e.g. 55, then it terminates the call, „Minimize“ terminates the call)
Need help?
Do you have a question about the IP bell and is the answer not in the manual?
Questions and answers