4.12 Relays
After performing of changes please don't forget click on „Save".
In relays setting are accessible 4 relays. The relays 1 and 2 is output of
relays contacts directly in IPBELLv2 door entry. Next 2 relays (3 and 4) is
possible use for remote relays (IP relays via follow) or as virtual relay usefull for
synchronization to allows creation of more difficult functions of relays. The relay
selection is perform by click to relay number in top highlighted row –
similiary as in phone book.
Enabled – relay function might be eliminated.
synchronization signal for other relays. Meaning is for example when
you want temporarily prevent certain door opening. Then instead of all
codes cancellation and their repeated programming simply prohibit this
relay. After time out you can easily return relay with all codes to original
44
User manual
IPBELLv2
-
uet his will be eliminated
Need help?
Do you have a question about the IPBELLv2-01 and is the answer not in the manual?