Installation Of The Imatch Interface (Home Automation System) - KAL-FIRE ECO-prestige 75 Installation Instructions Manual

29. Installation of the iMatch interface (home automation system)

A
B
C
The iMatch interface (an option available at an additional cost) is delivered with 4 components.
1. Connect the cables as indicated in the image above.
2. Install the iMatch in the technical unit. Connect cable A to the burner control (HDIMS). See the circuit diagram below.
<iMatch>
3. Disconnect the adaptor cable (24 V) from the burner control (HDIMS). Connect cable B to the burner control (HDIMS).
4. Connect cable C to the adaptator cable.
A red LED indicator should now light up on the iMatch interface.
B
C
only for Fairo ECO-prestige hybrid
66