Fairo Eco-Prestige: Three Safety Measures - KAL-FIRE ECO-prestige 75 Installation Instructions Manual

22. Fairo ECO-prestige: three safety measures

1. An electronic flame ionisation detector detects the presence of flames.
If the Fairo ECO-prestige does not detect a flame, the delivery of gas is cut off for 1 minute. Following that, the fireplace will attempt
to reignite automatically. If the fireplace must be switched off immediately and should not be relit, hold down the button on the
remote control for around 10 seconds. This 'emergency stop' definitively cancels the heat-controlling device, pre-empting automatic
reignition.
2. 24-hour safety
After 3 consecutive automatic ignition attempts without any flame being detected, the system will be blocked (code A08). In this
case, it is possible to use the remote control to try to unblock the fire a further 2 times (see section 35.2) before the system is locked
for 24 hours (lock-out code F08). If this occurs, the Fairo ECO-prestige cannot be used for 24 hours, a feature designed to ensure
user safety.
3. Overpressure safety device
The Fairo ECO-prestige is equipped with an overpressure safety device to minimise the risk of damage in the event of an explosive
ignition.
48