Safety Instructions - KAL-FIRE ECO-prestige 75 Installation Instructions Manual

21. Safety instructions

This appliance must be installed in an area with sufficient ventilation in compliance with the standards in force. Before the appliance
is installed, check that conditions such as gas pressure and gas type correspond with the information on the appliance's data
identification plate. Please observe the following safety measures:
If you smell gas (risk of explosion) or there is leakage of smoke or fumes (formation of carbon monoxide):
1 Switch off the gas fire immediately.
2 Shut off the gas valve.
3 Open the doors and windows.
4 Contact a certified installer.
If the flames are suddenly extinguished when the fire is operating, no matter what the cause, wait for 3 minutes before
switching the fire back on.
Fire hazard
Ensure that curtains or any other flammable materials are at a distance of at least 50 cm from the Fairo ECO-prestige
fireplace.
Risk of burning
The area above and around the gas fireplace can reach high temperatures, which could be a burn hazard. Increase safety
measures if a child or an elderly or less able-bodied person is in the proximity of the fireplace.
Switch off the fireplace immediately if there is a crack in the glass in the door or if the glass has not yet been installed.
The heat generated by the Fairo ECO-prestige's convection system can cause dust particles or the smoke from cigarettes,
candles or oil lamps to discolour walls or ceilings. Thus it is advisable to ensure sufficient ventilation in the room where
the fireplace is installed.
The Fairo ECO-prestige is intended to be used only as a fire to provide ambiance, and as a result should not be installed as
the principal heating system for an entire home or part of a home.
The Fairo ECO-prestige requires a constant supply of electricity. If the power is cut off, the safety mechanisms may not
function, which could result in a hazardous situation.
47