DG Flugzeugbau DG-1000 Flight Manual page 98

7.4.
1. a) Gliding screen
Upper centre: Stall factor, see set up menu.
Upper right: Time, instead of the time CHT will be displayed as long as the CHT is
above 50°C.
7.4.1. b) Powered flight screen
Upper centre:
a) With the engine running the engine RPM will be displayed. When exceeding the
max. continuous engine speed "Hi" will be displayed and is blinking at the left
hand side of the RPM display..
When exceeding the max. engine RPM the message "Engine Speed"will be
displayed, the "Warning" symbol is blinking, after verifying this message the
RPM display is blinking.
b) As long as the engine is not running symbols showing the position of the
powerplant will be displayed. If the powerplant is moving, in addition an arrow
will be displayed showing if the powerplant is be retracted or extended (not when
moving the powerplant via the manual switch). As soon as the powerplant is
completely retracted the screen changes to the gliding screen. .
In case the propeller is not in the position for retraction a short propeller
will be displayed.
powerplant extended
propeller in position for retraction
powerplant in position for stopping the propeller
powerplant in position propeller stopper extended
propeller not in position for retraction
Issued: July 2017
Flight manual DG-1000T
In position for retraction a long propeller will be displayed.
TN1000/32
propeller not in position for retraction
propeller in position for retraction
side view)
7.11