Tele Radio PN-RX-MNB5 Installation Instructions Manual page 9

FUNCTION LEDS INDICATION IN OPERATING MODE
Function LED Off On Indicates
x Not compliant with PL d
7 (red)
x Compliant with PL d
x No transmitter is registered.
Flashes once: One or more transmitters are registered. No radio transmission
x
established.
8 (red)
Double flash: One or more transmitters are registered and logged in. No radio
x
transmission established.
x Radio transmission established.
9 (yellow) x Receiving a radio packet from a transmitter other than a Panther.
Receiving a radio packet from a transmitter set to the radio mode different from
9 (yellow)
10 (green)
that of a receiver.
9 (yellow)
x Received a radio packet from a transmitter that is not registered.
11 (orange)
10 (green) x Received a radio packet, low signal (RSSI).
11 (orange) x Received a radio packet, configuration ID not accepted.
10 (green)
x Received a radio packet, custom ID not accepted.
11 (orange)
1. A radio packet from a registered transmitter received. Another registered
9 (yellow)
transmitter already controlling the transmitter. NOTE! "Radio link" must be
10 (green) x
activated in the receiver.
11 (orange)
2. Active load selection is activated.
- 7 -