Regal 26 FASDECK Owner's Manual page 135

CHECKING STEERING SYSTEM OPERATION
Your outboard features a mechanical-hydraulic rack
style steering system.
permit hydraulic uid to pass through the system
allowing the steering arm at the outboard to turn the
vessel to port or starboard.
located behind the steering wheel.
the helm and engine ends must be checked regularly for
tightness, lubrication, and leaks. Check the steering
system for full steering to port and starboard before
disembarking. Typical hydraulic pump shown below. It
is located in the a Lazerete storage area.
Refer to your outboard motor operator's manual for
adding uid to the pump and type required.
CHECK HOSE
CONNECTIONS
TYPICAL HYDRAULIC STEERING PUMP
e unit utilizes valves which
is check valve cluster is
e hardware at both
CHECK HOSE
CONNECTIONS
HYDRAULIC RACK STEERING CLUSTER
HYDRAULIC SYSTEM BLEED FITTINGS
STEERING HARDWARE & HOSES AT ENGINE
28
Chapter 5
UNDER DASH