Electronics - Regal 26 FASDECK Owner's Manual

REGALVUE DISPLAY
TYPICAL DISPLAY SHOWN
If installed the RegalVue display features a touch screen
for full control of various functions at your ngertips
including GPS tracking, multi-media display, speed
control, along with many di erent engine parameters
and service codes as the engine is running.
Select units display fuel, engine rpm, speed, tempera-
ture and volts.
Normally the unit comes loaded with display informa-
tion and generic chart.
READ AND UNDERSTAND the RegalVue display
owner's manual before attempting to use or to navigate
with the unit. is includes all warning and safety infor-
mation.
TYPICAL USB DEVICE
form of a USB device sometimes known as a wireless
adapter or thumb drive. To download the chart on to
the RegalVue display access the rear of the display unit
under the helm. ere you will see a wire hanging down
with a USB connector. Simply plug the wireless adapter
into the connector and follow the instructions to down-
load your regional chart into the display unit.
Regional speci c wa-
terway charts can be
ordered from your
Regal dealer at a
nominal cost. ese
region speci c water
charts arrive in the
Quick Access Keys
e vertically located access keys permit each of the
controls to be accessed and further tweaked.
clude beginning on the port side of the display and
working downward;
Stereo
Video
Diagnostic Messages
Settings
Maps
Speed Controls
Engine Statistics
Home
Touch Point Commands
ese commands furnish additional features and navi-
gation shortcuts.
icons or a vertical control bar depending on the current
screen being displayed.
Touch point commands are used throughout the Regal-
Vue display to;
Navigate the Screen
Navigate to More Detailed Layers or Levels
Edit Settings
Access Features
Note: Select touch points are graphics or words high-
lighted with a so glow,
50
Chapter 4
e commands may be displayed as
ey in-