Ablerex MSRT-Pro 1KVA User Manual page 15

N
O
4.4.2.4 UPS Default Data and Special Function Execution
(1) After UPS is turned on successfully, use
Display screen to drawing P1.
P1
P2
(2) Press key pad to scroll down the LCD screen, then check the UPS
settings. The LCD display will show in sequence: Drawing
P1(buzzer) Drawing Q1(self test) Drawing R1(Bypass
Voltage) Drawing S(Output Frequency Synchronized Window) Drawing
T(Inverter Output Voltage) Drawing U1(UPS Operation Mode) Drawing
V(Output Voltage Fine Tuning)
key pad to change the LCD
28
Q1
Q2
R1
R2
S
29