Introduction; About This Manual; Assumptions; What You Should Already Know - Danfoss VLT 5000 Instruction Manual

Introduction

This manual provides comprehensive
instructions on the installation and set up of
the LonWorks Option Card for the
VLT 6000 and the VLT 8000
Frequency Drive to communicate over a
LonWorks network.
For specific information on installation and
operation of the adjustable frequency drive,
refer to the
and Instruction Manual , VLT 6000 Installation,
This manual is intended to be used for both
About This
instruction and reference. It only briefly
Manual
touches on the basics of the LonWorks
protocol whenever it is necessary for gaining
an understanding of the LonWorks profile for
drives and the LonWorks Option Card for the
Adjustable frequency drive.
This manual is also intended to serve as a
guideline when you specify and optimize your

Assumptions

This manual assumes that you have a
controller node that supports the interfaces
in this document and that all the requirements
stipulated in the controller node, as well as
What You The Danfoss LonWorks Option Card is
designed to communicate with any controller
Should
node that supports the interfaces defined in
Already Know
LonMaker™ for Windows

References

VLT
Instruction Manual
(Referred to as the VLT Instruction Manual in
this document.)
VLT
Instruction Manual
(Referred to as the VLT Instruction Manual in
this document.)
MG.60.N1.22 - VLT is a registered Danfoss trademark
VLT 5000 Installation, Operation
® User's Guide.
®
5000 Installation, Operation and
®
6000 Installation, Operation and
VLT ® 5000 / VLT
Operation and Instruction Manual or VLT8000
Installation, Operation and Instruction Manual.
VLT 5000, Portions of this manual are printed with the
Adjustable permission of the Echelon Corporation and the
National Electrical Contractors Association of
the USA (NECA).
Echelon
are registered trademarks of the Echelon
Corporation. VLT
of Danfoss Inc.
communication system. Even if you are an
experienced LonWorks programmer, we
suggest that you read this manual in its entirety
before you start programming, since important
information can be found in all sections.
the Adjustable Frequency Drive, are strictly
observed along with all limitations therein.
this document. It is assumed that you have
full knowledge of the capabilities and
limitations of the controller node.
®
VLT 8000 Installation, Operation and Instruction
Manual
(Referred to as the VLT Instruction Manual in
this document.)
® 6000 HVAC / VLT ®
® , LonTalk ® , Neuron ® and LonWorks
®
is a registered trademark
8000 AQUA
®
5