Nbg6604 Access And Login - ZyXEL Communications NBG6604 User Manual

15.3 NBG6604 Access and Login

I don't know the IP address of my NBG6604.
The default IP address of the NBG6604 in Router Mode is 192.168.1.1. If the NBG6604 obtains a WAN IP
6
address in the same subnet as the LAN IP address 192.168.1.1, the default LAN IP address will be
changed to 10.0.0.1 automatically. See
The default IP address of the NBG6604 in Access Point Mode is 192.168.1.2.
If you changed the IP address and have forgotten it, you might get the IP address of the NBG6604 in
7
Router Mode by looking up the IP address of the default gateway for your computer. To do this in most
Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default
Gateway might be the IP address of the NBG6604 (it depends on the network), so enter this IP address in
your Internet browser.
If your NBG6604 in Access Point Mode is a DHCP client, you can find your IP address from the DHCP
8
server. This information is only available from the DHCP server which allocates IP addresses on your
network. Find this information directly from the DHCP server or contact your system administrator for
more information.
Reset your NBG6604 to change all settings back to their default. This means your current settings are lost.
9
See Section 15.5 on page 105
I forgot the password.
The default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
I cannot see or access the Login screen in the Web Configurator.
Make sure you are using the correct IP address.
1
The default IP address of the NBG6604 in Router Mode is 192.168.1.1. If the NBG6604 obtains a WAN IP
2
address in the same subnet as the LAN IP address 192.168.1.1, the default LAN IP address will be
changed to 10.0.0.1 automatically. See
The default IP address of the NBG6604 in Access Point Mode is 192.168.1.2.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
know the IP address of my NBG6604.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
3
Start Guide.
Chapter 15 Troubleshooting
Auto-IP Change on page 52
in the Troubleshooting for information on resetting your NBG6604.
Auto-IP Change on page 52
(Section 11.4 on page
NBG6604 User's Guide
102
for more information.
Section 15.5 on page
for more information.
81), use the new IP address.
105.
I don't