Table of Contents
Advertisement
Figure 17 Navigation Panel: Router Mode
The following table describes the sub-menus.
Table 10 Navigation Panel: Router Mode
LINK
FUNCTION
Status
System Status
This screen shows the NBG6604's general device, system and interface status information. Use
this screen to access the wizard, and summary statistics tables.
Client Tables
Use this screen to view current DHCP client information.
WAN
Internet
This screen allows you to configure ISP parameters, WAN IP address assignment, DNS servers
Connection
and the WAN MAC address.
NAT
Use this screen to enable NAT.
Use this screen to configure servers behind the NBG6604 and forward incoming service
requests to the server(s) on your local network.
Use this screen to change your NBG6604's port triggering settings.
Use this screen to configure VPN pass-through settings.
Dynamic DNS
Use this screen to set up dynamic DNS.
Wireless
Wireless
Use this screen to enable the wireless LAN and configure wireless LAN and wireless security
settings.
Guest Wireless
Use this screen to configure multiple BSSs on the NBG6604.
MAC Filter
Use the MAC filter screen to configure the NBG6604 to block access to devices or block the
devices from accessing the NBG6604.
Advanced
This screen allows you to configure advanced wireless settings.
WPS
Use this screen to configure WPS.
Scheduling
Use this screen to schedule the times the Wireless LAN is enabled.
LAN
LAN IP
Use this screen to configure LAN IP address and subnet mask.
Use this screen to enable the NBG6604's DHCP server.
Static DHCP
This screen allows you to assign IP addresses on the LAN to specific individual computers based
on their MAC addresses.
Applications
UPnP
Use this screen to enable UPnP on the NBG6604.
One Connect
Use this screen to enable or disable Wi-Fi auto-configuration.
Security
Chapter 5 Router Mode
NBG6604 User's Guide
29
Hide quick links:
Advertisement
Table of Contents
