ZyXEL Communications NBG6604 User Manual page 27

Figure 16 Status > System Status: Router Mode
The following table describes the labels shown in the Status screen.
Table 9 Status > System Status: Router Mode
LABEL DESCRIPTION
Device Information
Item This column shows the type of data the NBG6604 is recording.
Data This column shows the actual data recorded by the NBG6604.
Host Name This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
Model Number This is the model name of your device.
Firmware Version This is the firmware version.
Sys OP Mode This is the device mode
Mode.
WAN Information
MAC Address This shows the WAN Ethernet adapter MAC Address of your device.
IP Address This shows the WAN port's IP address.
IP Subnet Mask This shows the WAN port's subnet mask.
Default Gateway This shows the WAN port's gateway IP address.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port's IP address.
IP Subnet Mask This shows the LAN port's subnet mask.
DHCP This shows the LAN port's DHCP role - Server or Disable.
WLAN 2.4G Information
Chapter 5 Router Mode
(Section 4.1.1 on page
NBG6604 User's Guide
27
25) to which the NBG6604 is set - Router