Table of Contents
Advertisement
Follow the steps below to configure the wireless settings on your NBG6604.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
Make sure the WIFI switch (at the rear panel of the NBG6604) is set to ON.
1
Open the Wireless > Wireless screen in the AP's Web Configurator.
2
Confirm that the wireless LAN is enabled on the NBG6604.
3
Select to configure the wireless settings for the 2.4GHz wireless radio.
4
Enter SSID_Example3 as the SSID and select Channel-06 as the channel. Set security mode to WPA2-PSK
5
and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field. Click Apply.
Chapter 7 Tutorials
NBG6604 User's Guide
41
Section 2.2 on page
14).
Hide quick links:
Advertisement
Table of Contents
