Table of Contents
Advertisement
Figure 43 Wireless > Guest Wireless > Guest Wireless Setup: Edit
The following table describes the labels in this screen.
Table 25 Wireless > Guest Wireless > Guest Wireless Setup: Edit
LABEL
DESCRIPTION
Active
Select this to activate the SSID profile.
Name (SSID)
The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated.
Enter a descriptive name (up to 32 printable characters found on a typical English language
keyboard) for the wireless LAN.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain
the SSID through scanning using a site survey tool.
Intra-BSS Traffic
A Basic Service Set (BSS) exists when all communications between wireless clients or between a
Blocking
wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled, wireless
clients can access the wired network and communicate with each other. When Intra-BSS is
disabled, wireless clients can still access the wired network but cannot communicate with each
other.
WMM QoS
Check this to have the NBG6604 automatically give a service a priority level according to the
ToS value in the IP header of packets it sends.
WMM QoS (Wifi MultiMedia Quality of Service) gives high priority to voice and video, which
makes them run more smoothly.
Maximum
Enter a number to specify maximum bandwidth the Guest Wi-Fi network can use.
Bandwidth
Security Mode
Select WPA-PSK or WPA2-PSK to add security on this wireless network. The wireless clients which
want to associate to this network must have same wireless security settings as this device. After
you select to use a security, additional options appears in this screen. See
70
for detailed information on different security modes. Or you can select No Security to allow
any client to associate this network without authentication.
Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are
Apply
Click Apply to save your changes back to the NBG6604.
Cancel
Click Cancel to reload the previous configuration for this screen.
Chapter 10 Wireless LAN
available in this field.
NBG6604 User's Guide
74
Section 10.3 on page
Hide quick links:
Advertisement
Table of Contents
