Guest Wireless Screen - ZyXEL Communications NBG6604 User Manual

Figure 41 Wireless > Security Mode: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Table 23 Wireless > Security Mode: WPA-PSK/WPA2-PSK
LABEL
Security Mode
WPA-PSK
Compatible
PMF
Pre-Shared Key
Group Key Update
Timer
Apply
Cancel

10.4 Guest Wireless Screen

This screen allows you to enable and configure multiple guest wireless network settings on the NBG6604.
Chapter 10 Wireless LAN
DESCRIPTION
Select WPA-PSK or WPA2-PSK to enable data encryption.
This field appears when you choose WPA2-PSK as the Security Mode.
Check this field to allow wireless devices using WPA-PSK security mode to connect to your
NBG6604.
Protected Management Frames (PMF) is a protection mechanism of action management
frames.
Check this field to allow wireless devices using the PMF protection mechanism to connect to
your NBG6604.
WPA-PSK/WPA2-PSK uses a simple common password for authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
The Group Key Update Timer is the rate at which the AP sends a new group key out to all
clients.
The default is 3600 seconds (60 minutes).
Click Apply to save your changes back to the NBG6604.
Click Cancel to reload the previous configuration for this screen.
NBG6604 User's Guide
72