The Internet - ZyXEL Communications NBG6604 User Manual

Figure 68 Maintenance > Operation Mode
The following table describes the labels in the Operation Mode screen.
Table 41 Maintenance > Operation Mode
LABEL DESCRIPTION
Configuration Mode
Router Mode Select Router Mode if your device routes traffic between a local network and another
network such as the Internet. This mode offers services such as a firewall.
You can configure the IP address settings on your WAN port. Contact your ISP or system
administrator for more information on appropriate settings.
Access Point Mode Select Access Point Mode if your device bridges traffic between clients on the same
network.
•
•
•
•
•
Apply Click Apply to save your settings.
Cancel Click Cancel to return your settings to the default (Router).
Note: If you select the incorrect system operation Mode you may not be able to connect to

the Internet.

Chapter 14 Maintenance
In Access Point Mode, all Ethernet ports have the same IP address.
All ports on the rear panel of the device are LAN ports, including the port labeled WAN.
There is no WAN port.
The DHCP server on your device is disabled.
Router functions (such as NAT, remote management, firewall and so on) are not
available when the NBG6604 is in Access Point Mode.
The IP address of the device on the local network is set to 192.168.1.2.
NBG6604 User's Guide
100