Leds - ZyXEL Communications NBG6604 User Manual

Note: You must activate WPS in the NBG6604 and in another wireless device within two
minutes of each other.

1.7 LEDs

Figure 1 Top Panel
Table 1 Top Panel LEDs
FUNCTION
Power/SYS
Internet
WLAN 5G
Chapter 1 Introduction
COLOR STATUS
White
On
Off
Blinking
White On
Off
Blinking
White Amber On
Off
White blinking
Amber blinking
Amber steady off
NBG6604 User's Guide
5G 2.4G
WLAN 5GHz
BEHAVIOR
The NBG6604 is ready.
The NBG6604 is powered off.
The firmware is being updated and restored. System is
booting.
The IP connection is available but no traffic.
The IP connection is not available.
The NBG6604 is transmitting/Receiving traffic.
The WLAN interface is enabled.
The WLAN interface is disabled.
The NBG6604 is transmitting/receiving data.
The WPS process is in progress (at the same time, disable the
white LED).
The WPS process is inactive.
11
WPS