Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 35 Maintenance > General
LABEL
System Name
Domain Name
Administrator
Inactivity Timer
Apply
Cancel
14.4 Password Screen
It is strongly recommended that you change your NBG6604's password.
If you forget your NBG6604's password (or IP address), you will need to reset the device. See
on page 96
Click Maintenance > Password. The screen appears as shown.
Figure 58 Maintenance > Password
The following table describes the labels in this screen.
Table 36 Maintenance > Password
LABEL
Old Password
New Password
Retype to Confirm
Apply
Cancel
Chapter 14 Maintenance
DESCRIPTION
System Name is a unique name to identify the NBG6604 in an Ethernet network.
Enter the domain name you want to give to the NBG6604.
Type how many minutes a management session can be left idle before the session times out.
The default is 5 minutes. After it times out you have to log in with your password again. Very
long idle timeouts may have security risks. A value of "0" means a management session
never times out, no matter how long it has been left idle (not recommended).
Click Apply to save your changes back to the NBG6604.
Click Cancel to begin configuring this screen afresh.
for details.
DESCRIPTION
Type the default password or the existing password you use to access the system in this
field.
Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays an asterisk (*) for each character you type.
Type the new password again in this field.
Click Apply to save your changes back to the NBG6604.
Click Cancel to begin configuring this screen afresh.
NBG6604 User's Guide
92
Section 14.8
Hide quick links:
Advertisement
Table of Contents
