Third Party Ddns; Other Settings; Network Setting; Basic Network Setting - Wansview NCB-541W User Manual

http://www.wansview.com
figure 11.

4.3.2 Third Party DDNS

User can also use third part DDNS, such as
domain name from this website and fill the info into the below blanks (Figure 12) and
save the settings. Then the domain name can be used.
Note: Using the third party domain name, if the http port is not 80, the port number should
be adding to the domain name with colon. Example: http://btest.dyndns.biz:81.
While manufacturer DDNS is no need to add PORT.

5 Other Settings

5.1 Network Setting

5.1.1 Basic Network Setting

The user can also enter the Basic Network Settings to set the IP address except using
the search software. See below Figure 13.

5.1.2 WIFI Setting

If the device is with WIFI, enter the Wireless LAN Setting, just as below Figure 14 shown,
click the "Scan" button, it will show you all the wireless networks detected in the Wireless
Network List column. Select one of them and tick "Using Wireless Lan", then the relevant
Figure 11
www.dyndns.com
Figure 12
Figure 13
User must apply a free
12