Notes; Technical Specifications - Zublin MZ5000 Operating Instructions Manual

Notes

Technical specifications

MZ 5000 motion detector
Nominal voltage:
Switching capacity relay 1:
manual!)
Switching capacity relay 2:
Twilight value setting: Learn/2 lux to day light (only for relay 1)
Time setting relay 1 + 2:
Coverage area:
Range (at a height of approx. 2.3 m):
(horizontal up to 26°)
(Adjustment
BiDi mod required)
Creep zone protection:
Installation height:
Dimensions:
Ambient working temperature:
Protection class:
MZ 5000 BiDi module (bi-direction wireless module for the MZ 5000 motion
detector)
Nominal voltage:
Transmitting frequency:
Transmitting range:
Transmitting/receiving data:
Ambient working temperature:
Protection class:
MZ 5000 control pad (bi-directional wireless remote control for the MZ 5000
motion detector)
Nominal voltage:
Service life of the batteries:
day
Transmitting frequency:
Transmitting range:
Transmitting/receiving data:
MZ5000/BiDi
Alarm:
Tones/sounds:
detection
230Volt/50Hz
2300W/max. 10A (cos φ = 1)
1150VA/max. 5A inductive (cos φ = 0.5)
(See information provided in the instruction
max. 5A
Pulse of approx. 1 second (20-second pause),
approx. 3 seconds to 30 minutes
180° wall/ceiling/corner installation
)
max. 3 m radius
1.5 to 3.5 m (optimum 2.3 m to 2.5 m)
109x95x107 mm (WxHxD)
-20°C to +45°C
Power supply provided by motion detector
max. 100 m (in an open area)
can be combined with a total of max.
4 control pads and/or MZ 5000 with BiDi
module
-20°C to +45°C
Batteries (4x 1.5V LR 03 AAA)
approx. one year based on five activations per
max. 100 m (in an open area)
approx. 20 to 50 m when operated manually
can be combined with a max. of four
Visual (LED) and acoustic (tone/sound)
Seven different tones/sounds to indicate
max. 16 m radius L+R internal tilt
Sensitivity adjustable (hi/med/lo
IP 54 class II
433Mhz (64k encoding possible)
IP 54 class II
433Mhz (64k encoding possible)