Network Daughter Card; Removing The Network Daughter Card - Dell EMC PowerEdge R740 Installation And Service Manual

Rack
Table of Contents

Advertisement

Figure 74. Installing the optional IDSDM/vFlash card
Next steps
1
Install the micro SD cards.
NOTE:
Re-install the micro SD cards into the same slots based on the labels you had marked on the cards during
removal.
2
If applicable, install the full height PCIe card.
3
Follow the procedure listed in
Related links
System board jumpers and connectors
Installing the micro SD card
Installing expansion card into expansion card riser

Network daughter card

The network daughter card (NDC) is a small, removable mezzanine card, which provides the flexibility of selecting different network
connectivity options.
CAUTION:
If the GPU card is installed, you cannot install the 10 GbE NDC.

Removing the network daughter card

Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
After working inside your
system.
Safety
instructions.
Before working inside your
system.
Dell EMC PowerEdge R740 Installation and Service Manual
Installing and removing system components
127

Advertisement

Table of Contents
loading

Table of Contents